NOTE Recommended periodicity: each 12 000 km of run or 6 months.

The faultless condition of brushes of screen wipers is a necessary condition of ensuring good visibility.

To avoid deformation of brushes, it is necessary to clear regularly them means for washing of glasses. At strong pollution of brushes, for example the remains of insects, clear them by means of a sponge or a pure rag.

One-two time a year it is recommended to replace brushes of screen wipers.

At frosts before a trip check, whether brushes froze to glass.

At an automatic wash of the car on a windscreen wax particles can get. That them to remove, add in a tank of a stekloomyvatel means for washing of the glasses, possessing property to dissolve wax.

Tank filling for liquid means for cleaning of glasses with voskorastvoryayushchy properties can essentially improve action of screen wipers. Zhirorastvoryayushchiye cleaners do not clear glass of wax completely.

The damaged brushes replace.

Lift the lever of a brush of a screen wiper from a windscreen. Turn a screen wiper brush at an angle 90 ° to the screen wiper lever.

Fig. 2.8. Removal of a brush of a screen wiper from the screen wiper lever: And — a clamp

Press a clamp And (fig. 2.8) of a brush of a screen wiper, then move a brush on the lever and, moving it in the opposite direction, remove from the screen wiper lever.

Fig. 2.9. The direction of removal of a rubber tape from a screen wiper brush

Release captures of a brush of a screen wiper from dredging in an end face of a rubber tape and take a rubber tape of a screen wiper from a brush end face (fig. 2.9) .

Insert the end of a new rubber tape into captures on the right side of a brush of a screen wiper and, moving, establish it into place, before fixing of captures of a brush of a screen wiper in dredging of a rubber tape.

Establish screen wiper brushes on levers in sequence, return to removal. Thus the clamp should fix accurately a brush on the screen wiper lever.

Lower the screen wiper lever on a windscreen.