Disconnect a "weight" wire from the storage battery.

Dump pressure in fuel system.

The filter is established on a fire-prevention partition under the case of the air filter and the block of safety locks and the relay. Remove the case of the air filter and the block of the relay and safety locks.

Fig. 2.29. An arrangement of a bolt of fastening of the fuel filter on release cars till 2001

Wrench turn out the top hollow bolt and weaken the carving union in the basis of the fuel filter (fig. 2.29) .

Turn out bolts of fastening of an arm of the fuel filter to a fire-prevention partition and remove the old filter together with an arm.

Note an arrangement of hoses of giving and a fuel exit on the fuel filter taking into account that the flange of the filter is directed down. Disconnect hoses from the old filter and connect them to the new filter. Establish the filter, thus a hose of supply of fuel the hose of an exit of fuel — down should be directed up, and.

NOTE Recommended periodicity: each 50 000 km of run or 24 months.

Screw the carving union on the filter basis. Screw a hollow bolt with new washers in the top part of the filter and tighten it the moment of 28 N • m.

Further installation make in sequence, return to removal.