Removal of the generator make as follows:
Switch off ignition and disconnect a "weight" wire from the storage battery.
Remove a belt of a drive of the generator.
|
|
Fig. 15.16. Elements of fastening of the generator on models till 2001: 1–sharnirny bolt; 2–adjusting bolt; 3–connecting wires of the generator; 4–electric socket; 5–generator; 6–belt of a drive of the generator
|
|
|
Fig. 15.17. Elements of fastening of the generator on models since 2001 of release: 1–belt of a drive of the generator; 2–bracket of fastening of wires; 3–connecting wires of the generator; 4–generator; 5–electric socket; 6–bracket of fastening of wires; 7–clip of fastening of wires
|
On models till 2001 turn out adjusting and sharnirny bolts.
|
|
Fig. 15.18. An arrangement of bolts of fastening of the generator on models since 2001
|
On models since 2001 turn out bolts of fastening of the generator
(fig. 15.18)
.
Remove the generator from the car.
Installation of the generator make in sequence, return to removal, taking into account the following:
If the new generator is established, rearrange on it a pulley from the old generator.
Check the tension developed by the generator.