RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
   General information
   Technical characteristics
   Electric chains
   Check of the storage battery
   Replacement of wires of the storage battery
   Safety locks and relay
   Check and replacement of the relay of indexes of turn and alarm light system
   Check of system of a charging
   System of start-up of the engine
   Replacement of the combined podrulevy switches
   Replacement of the lock and cylinder of the lock of ignition
   Removal and installation of switches of the dashboard
   Removal and installation of a combination of devices
   Check and replacement of the engine of a screen wiper
   Radio receiver and loudspeakers
   Aerial replacement
   Check and repair of a heater of back glass
   Replacement of lamps in headlights
   Adjustment of light of headlights
   Headlight replacement
   Sound signal
   Replacement of filament lamps
   Check of a drive of external rear-view mirrors
   System check cruise control
   Check of window regulators with an electric drive
   Check of system of the central blocking of locks
   Drive of the elevating and movable panel of a roof
   Safety cushions
Electric equipment schemes

Toyota RAV4>> Electric equipment>> Sound signal
Cars are equipped with the systems of safety (SRS) including safety cushions and natyazhitel of seat belts. Before work about sensors of blow, the dashboard and a steering column disconnect at first negative, and then positive the plug from the storage battery and wait for 2 minutes. It will exclude unauthorized disclosure of safety cushions and operation of natyazhitel of seat belts which can put injuries.

Check of a sound signal make as follows.
Check integrity of safety locks in an electric chain of a sound signal.
Disconnect the electric socket from a sound signal.
Additional wires submit tension from the storage battery to a sound signal. If the signal does not work, replace it.
If the sound signal works, check tension in the electric socket by pressing of the button of inclusion of a sound signal. If tension on the socket is present, check connection of a sound signal with "weight".
In the absence of tension on the electric socket check the relay of a sound signal.
If the relay is serviceable, check a chain of giving of tension to contacts of the relay and a chain of management of the relay. In the absence of tension on the relay check an electric chain between the relay and the block of safety locks.
If tension moves to the relay, press the button of a sound signal and check an electric chain between the relay and the button. If the electric chain is serviceable, replace the button of inclusion of a sound signal.
Replacement of a sound signal make as follows.
Remove a front bumper.

Fig. 15.52. Arrangement of bolts of fastening of sound signals

Disconnect the electric socket, turn out a bolt and remove a sound signal (fig. 15.52) .
Installation of a sound signal make in sequence, return to removal.