PREVENTIONS H7 filament lamps of an elevated pressure can burst at replacement therefore it is necessary to replace these lamps in gloves and goggles. Do not concern a glass flask of a lamp barehanded. Fatty traces on a lamp lead to dimness of a flask and a fast exit of a lamp out of operation. Surely replace the failed lamps with lamps of the same type. Fatty spots arising on imprudence wipe a pure bezvorsovy rag or alcohol.

Replacement of a headlight make as follows.

Take from a headlight the filament lamp.

For access to the bottom bolts of fastening of a headlight on models till 2001 remove the decorative cover located under a headlight, and on models since 2001 — facing of a radiator and the forward panel of facing of headlights.

Fig. 15.50. A headlight and components surrounding it on models till 2001: 1–decorative cover; 2–headlight; 3–lamp of the index of turn; 4–front bumper; 5–cover of lateral extension of a bumper; 6–lamp of the index of turn; 7–headlight; 8–decorative cover

Fig. 15.51. A headlight and components surrounding it on models since 2001: 1–headlight; 2–radiator facing; 3–headlight; 4–amplifier of a bumper; 5–forward panel of facing of headlights; 6–sound signal; 7,9,11,13-lamps of indexes of turn; 8, 12 – fog lights; 10-front bumper

Turn out screws and remove a headlight from the car (fig. 15.50, 15.51) .

Installation of a headlight make in sequence, return to removal. After installation check and if necessary adjust the direction of a beam of light of headlights.