RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windscreen and motionless glasses
   Removal and cowl installation
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating lattice
   Removal and installation of an upholstery of doors
   Doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of a luggage compartment
      Removal and installation of a door of a luggage compartment
      Adjustment of a door of a luggage compartment
      Removal and installation of the lock of a door of a luggage compartment
      Removal and installation of the external handle and cylinder of the lock of a door of a luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of furnish of the dashboard
   Removal and installation of casings of a steering column
   Removal and dashboard installation
   Removal and installation of seats
   Adjustment of the elevating and movable panel of a roof
15. Electric equipment
Electric equipment schemes






Toyota RAV4>> Body>> Door of a luggage compartment>> Removal and installation of the external handle and cylinder of the lock of a door of a luggage compartment
Removal of the external handle and the cylinder of the lock of a door of a luggage compartment make as follows:
Open a door of a luggage compartment and remove from a door an upholstery and a pylevlagozashchitny film.
Through an opening in the internal panel of a door release plastic clips and disconnect drafts from the external handle of a door and the lock cylinder.
All drafts fasten to the lock plastic clips which it is necessary with effort to remove and take away from draft, then to extend draft from a clip opening.
On doors with electric blocking of locks disconnect electric sockets from the lock.
Through an opening in the internal panel of a door turn out screws of fastening of the external handle and remove it from a door.
Turn out the screw (ы) and remove the lock cylinder from the external handle of a door.
Installation make in sequence, return to removal, taking into account the following:
Fix a pylevlagozashchitny film, having established it without folds and gaps. The surface on which the pylevlagozashchitny film is pasted, should be ideally pure.