RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windscreen and motionless glasses
   Removal and cowl installation
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating lattice
   Removal and installation of an upholstery of doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of a luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of furnish of the dashboard
   Removal and installation of casings of a steering column
   Removal and dashboard installation
   Removal and installation of seats
   Adjustment of the elevating and movable panel of a roof
15. Electric equipment
Electric equipment schemes

Toyota RAV4>> Body>> Removal and dashboard installation
Cars are equipped with the systems of safety (SRS) including safety cushions and natyazhitel of seat belts. Before work about sensors of blow, the dashboard and a steering column disconnect at first negative, and then positive the plug from the storage battery and wait for 2 minutes. It will exclude unauthorized disclosure of safety cushions and operation of natyazhitel of seat belts which can put injuries.

Removal of the dashboard make as follows:
Switch off ignition and disconnect a "weight" wire from the storage battery.
Remove furnish panels about dashboards and the central console.
Remove a combination of devices.
Disconnect the electric socket from a safety cushion of the forward passenger and on models since 2001 of release, remove a safety cushion.
Remove a radio receiver from the dashboard.
Remove a control panel the conditioner.
Remove the bottom left panel of furnish and the amplifier of the panel. Turn out bolts of fastening of a steering column and reject it down from the dashboard.

Fig. 14.56. An arrangement of electric sockets of the dashboard on models with 2001 годамоделях since 2001

Mark and disconnect electric sockets from the dashboard (fig. 14.56) .

Fig. 14.57. An arrangement of the main electric sockets of the dashboard on models till 2001

On models till 2001 disconnect the main electric sockets from each party of the dashboard and turn out two bolts of fastening of wires of weight in the dashboard center (fig. 14.57) .

Fig. 14.58. An arrangement of bolts, screws and nuts of fastening of the dashboard on models till 2001

Fig. 14.59. An arrangement of bolts of fastening of the amplifier of the dashboard on models till 2001

Turn out all bolts, screws and nuts of fastening of the dashboard to a car body, then lift the panel and through a door, take from the car (fig. 14.58) . It is a laborious work and to carry out it it is necessary with the assistant. Also, probably, it is required to turn out bolts and to remove the amplifier of the dashboard (fig. 14.59) .
Installation of the dashboard make in sequence, return to removal.