Removal of a door of a luggage compartment make as follows.
Switch off ignition and disconnect a "weight" wire from the storage battery.
Remove a spare wheel from a door of a luggage compartment.
Open a door of a luggage compartment and support it supports or jacks, having laid between them and a door pure rags.
Remove from a door an upholstery and a pylevlagozashchitny film.
Mark and disconnect from a door all electric sockets, clips of fastening of wires and a wire of connection with "weight".
Disconnect from a door the protective goffered cover, and through the opened opening extend wires from a door.
Turn out bolts of fastening of the limiter of opening of a door.
Marker note position of hinges of a door.
|
|
Fig. 14.42. An arrangement of bolts of fastening of hinges to a door of a luggage compartment and bolts of fastening of the limiter of opening of a door to a body
|
While the assistant supports a door, turn out bolts of fastening of hinges to a door and remove a door from the car
(fig. 14.42)
.
Installation of a door of a luggage compartment make in sequence, return to removal.
Fix a pylevlagozashchitny film, having established it without folds and gaps. The surface on which the pylevlagozashchitny film is pasted, should be ideally pure.