RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windscreen and motionless glasses
   Removal and cowl installation
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating lattice
   Removal and installation of an upholstery of doors
   Doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of a luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of furnish of the dashboard
   Removal and installation of casings of a steering column
   Removal and dashboard installation
   Removal and installation of seats
   Adjustment of the elevating and movable panel of a roof
15. Electric equipment
Electric equipment schemes




Toyota RAV4>> Body>> Removal and installation of the central console
       PREVENTION
Cars are equipped with the systems of safety (SRS) including safety cushions and natyazhitel of seat belts. Before work about sensors of blow, the dashboard and a steering column disconnect at first negative, and then positive the plug from the storage battery and wait for 2 minutes. It will exclude unauthorized disclosure of safety cushions and operation of natyazhitel of seat belts which can put injuries.

Removal of the central console make as follows:
Switch off ignition and disconnect a "weight" wire from the storage battery.
Lift the lever of the parking brake.
If the car is equipped with a mechanical transmission, unscrew the button from the lever of gear shifting and remove a cover of the lever of gear shifting.

Fig. 14.45. Removal of a decorative overlay of the lever of the selector on cars since 2001, equipped with an automatic transmission


If the car is equipped with an automatic transmission, remove a decorative overlay of the lever of the selector (fig. 14.45) .
On models since 2001 turn out screws and an edge of a screw-driver separate the lower part of the central decorative overlay of the dashboard. Not to scratch the panel, wind a screw-driver edge with a sticky tape or rags.
On models till 2001 turn out screws of a lobby and an average part of the central console, then turn out the screw of fastening of a back part and, moving the console, remove it back.

Fig. 14.46. An arrangement of screws of fastening of back section of the central console on models since 2001


Fig. 14.47. An arrangement of a cover of furnish in forward section of the central console on models since 2001


On models since 2001 turn out screws and remove back section of the central console (fig. 14.46) . Also remove furnish covers in forward section of the central console (fig. 14.47) .

Fig. 14.48. An arrangement of screws of fastening of forward section of the central console on models since 2001


Turn out screws of fastening of forward section of the central console and remove it on the lever of the parking brake (fig. 14.48) .
Disconnect from forward section of the central console electric sockets and remove it from the car.
Installation of the central console make in sequence, return to removal