Removal of the lock of a door of a luggage compartment make as follows:
Switch off ignition and disconnect a "weight" wire from the storage battery.
Open a door of a luggage compartment and remove from a door an upholstery and a pylevlagozashchitny film.
Through an opening in the internal panel of a door release plastic clips and disconnect from the lock of draft of the external handle of a door and the lock cylinder.
All drafts fasten to the lock plastic clips which it is necessary with effort to remove and take away from draft, then to extend draft from a clip opening.
On doors with electric blocking of locks disconnect electric sockets from the lock.
|
|
Fig. 14.44. An arrangement of screws of fastening of the lock to a door of a luggage compartment
|
Turn out screws of fastening of the lock and remove the lock an opening in the internal panel of a door
(fig. 14.44)
. On models till 2001 remove four plastic caps and turn out screws.
Installation of the lock of a door of a luggage compartment make in sequence, return to removal, taking into account the following:
Fix a pylevlagozashchitny film, having established it without folds and gaps. The surface on which the pylevlagozashchitny film is pasted, should be ideally pure.