Adjustment of position of the elevating and movable panel of a roof carry out as follows:

Lift glass of the elevating and movable panel of a roof and leave it in this situation.

Adjustment of situation consists in removal of the engine of a drive and moving of cables before combination of labels on cables and a frame from two parties of the elevating and movable panel of a roof. For further adjustment make the following:

Fig. 14.62. An arrangement of screws (two screws are invisible) fastenings of glass of the elevating and movable panel of a roof

– turn out 4 screws and remove glass of the elevating and movable panel of a roof (fig. 14.62) ;

Fig. 14.63. Arrangement of screws of fastening of the top console

– remove a plafond of illumination of salon and open a cover for access to the engine of a drive of the elevating and movable panel of a roof and turn out screws of fastening of the top console (fig. 14.63) ;

Fig. 14.64. Arrangement of screws of fastening of the engine of a drive of the elevating and movable panel of a roof

– turn out screws and remove the engine, disconnecting it from a pulley with cables of a drive of the elevating and movable panel of a roof (fig. 14.64) ;

Fig. 14.65. Combination of labels on a cable and a frame of the elevating and movable panel of a roof

– move the end of a cable of a drive of the elevating and movable panel of a roof before combination of labels on cables and a frame from two parties of the elevating and movable panel of a roof (fig. 14.65) ;

– after adjustment establish the engine of a drive of the elevating and movable panel of a roof and the top console;

– adjust the provision of forward and back parts of the elevating and movable panel of a roof for what weaken screws of fastening of glass and shift it forward or back on the distance providing reliable consolidation of forward and back parts of the elevating and movable panel of a roof, and tighten screws.