Adjustment of doors make as follows:

Check a condition of hinges of a door for what open a door and lift it up, thus without lifting a body.

If moving of a door more than 1,6 mm, replace door hinges.

After installation of a door check, that the gap on perimeter of a door was everywhere identical, and also that the external surface of a door was flush with other elements of a body.

For gap adjustment on perimeter of a door weaken bolts of fastening of hinges of a door to a door and, moving a door, adjust its situation then tighten fastening bolts.

If thus to adjust the provision of a door it is impossible, get and enclose under hinges adjusting plates.

For door installation flush with other elements of a body weaken bolts of fastening of the hinge of a door to a door and adjust the provision of a door then tighten bolts.

Fig. 14.28. The directions of moving of a shock doggie of the lock of a door for adjustment of provision of a back part of a door

In the last turn weaken bolts and adjust the provision of a shock doggie of the lock of a door so that the back part of a door was flush with a back door or body elements (fig. 14.28) .