RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
   General information
   Technical characteristics
   System of onboard Diagnostics (OBD)
   Information sensors and executive stroystvo
   Codes of malfunctions of OBD-II system
   Control unit engine (PCM)
   Sensors and valves of system of injection of fuel (EFI)
      Replacement of the sensor of provision of a butterfly valve (TPS)
      Replacement of the sensor of absolute pressure of air in an inlet collector on models since 2001
      Replacement of the sensor of a measuring instrument of a consumption of air (MAF) on models since 2001
      Replacement of the sensor of the air temperature arriving in the engine (IAT) on models till 2001
      Replacement of the sensor of temperature of cooling liquid (ECT)
      Replacement of the sensor of an angle of rotation of a cranked shaft (CKP)
      Replacement of the sensor of provision of a camshaft (CMP) on models since 1998
      Replacement of sensors of oxygen (O2S) and toplivovozdushny mix (A/F Sensor)
      Replacement of sensors of a detonation
      Replacement of the sensor of speed of the car (VSS)
      Replacement of the valve of a control system with frequency of rotation of idling (IAC)
   System of compulsory ventilation of Carter (PCV)
   System of a retsirkulyatsiya of the fulfilled gases (EGR) on models since 2001
   Catching system паров fuels (EVAP)
   Catalytic converter
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Electric equipment schemes




Toyota RAV4>> The monitoring system and decrease in toxicity of the fulfilled gases>> Sensors and valves of system of injection of fuel (EFI)>> Replacement of the sensor of provision of a camshaft (CMP) on models since 1998

Fig. 7.14. The sensor of provision of a camshaft (CMP) on models till 2001: 1–electric socket; 2–sensor of provision of a camshaft (CMP)


Fig. 7.15. The sensor of provision of a camshaft (CMP) on models with 2001 года:1 – a sealing ring; 2–sensor of provision of a camshaft (CMP); 3–electric socket


The sensor of provision of a camshaft (CMP) defines position of the piston in the first cylinder and submits signals for consecutive injection of fuel to engine cylinders. The sensor is established on a head of the block of cylinders about a camshaft pulley (fig. 7.14, 7.15) .
Replacement of the sensor of provision of a camshaft (CMP) on models since 1998 carry out as follows:
– switch off ignition and disconnect a "weight" wire from the storage battery;
– disconnect the electric socket, turn out screws and remove the sensor.
Installation carry out to sequences, return to removal.