Removal of an external overlay of the dashboard make as follows:

Fig. 14.51. An arrangement of screws of fastening of the central overlay of the dashboard on models since 2001

On models since 2001 turn out screws and remove the central slip from the dashboard (fig. 14.51) .

Fig. 14.52. An arrangement of screws of fastening of the bottom central overlay of the dashboard on models since 2001

For removal of the bottom central overlay of the dashboard on models since 2001 turn out screws and an edge of a flat screw-driver release the lower part of a slip from the dashboard (fig. 14.52) . Not to scratch the dashboard, wind a screw-driver edge with a sticky tape or rags.

On models till 2001 remove a peak of a combination of devices and remove management handles from the control panel the heater/conditioner.

Also turn out screws of fastening of the panel of furnish under the CD player or a radio receiver and remove the panel.

Edge of a flat screw-driver release the lower part of an external slip from the dashboard.

Not to scratch the dashboard, wind a screw-driver edge with a sticky tape or rags.

Disconnect electric sockets from the back party of an external slip and remove it from the car.

Fig. 14.53. An arrangement of clamps of fastening of the bottom central overlay of the dashboard on models till 2001

For removal of the bottom central overlay of the dashboard on models till 2001 take four clamps and take out a slip (fig. 14.53) .

Installation of an external overlay of the dashboard make in sequence, return to removal.