RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windscreen and motionless glasses
   Removal and cowl installation
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating lattice
   Removal and installation of an upholstery of doors
   Removal and installation of glasses of doors
      Removal and installation of glasses of forward doors
      Removal and installation of glasses of back doors
      Removal and installation of glass of a door of a luggage compartment
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of a luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of furnish of the dashboard
   Removal and installation of casings of a steering column
   Removal and dashboard installation
   Removal and installation of seats
   Adjustment of the elevating and movable panel of a roof
15. Electric equipment
Electric equipment schemes

Toyota RAV4>> Body>> Removal and installation of glasses of doors>> Removal and installation of glasses of back doors
Removal of glasses of back doors make as follows:
Remove from a door an upholstery and a pylevlagozashchitny film.
Lower glass down to an emphasis.

Fig. 14.36. An arrangement of clamps (1) fastening of a pylevlagozashchitny strip on a back door

Releasing 5 clamps, remove from the outer side of a door a pylevlagozashchitny strip (fig. 14.36) .
Turn out a bolt and the screw, fixing back directing glasses, then remove back directing and motionless glass from a door.
Lift glass so that in openings of a door bolts of fastening of glass to a window regulator were visible.
Support glass and turn out bolts of fastening of glass.
Moving up and inclining, remove glass from a door.
Installation of glasses make in sequence, return to removal, taking into account the following:
Fix a pylevlagozashchitny film, having established it without folds and gaps. The surface on which the pylevlagozashchitny film is pasted, should be ideally pure.