Depending on a complete set on the car the elevating and movable panel of the hatch of a roof with a manual or electric drive can be established. The roof panel with an electric drive can be open or closed manually.
Opening: press the SLIDE switch.
Closing: press the switch from outside, opposite SLIDE.
Moving is carried out by pressing and switch deduction.
As a precautionary measure, the panel of a roof stops when closing on 3/4 courses. For complete closing release and repeatedly press the switch.
The panel of a roof can be opened by simple pressing of the UP switch. For closing, press the switch from outside, opposite UP.
For opening of the panel of a roof with a manual drive pull the handle down, pressing one of closing buttons, then open the panel up, before its fixing. For closing pull the handle down, holding the panel with a hand, then close the handle a hand palm.
Fig. 1.20. Release of a lateral spring of the demountable panel of a roof
For removal of the demountable panel of a roof pull the handle down, pressing one of closing buttons. Take out spring levers of fastening of the panel from nests, having compressed them towards each other, and raise the panel
. Unblock an auxiliary hook and a rotary motion remove the roof panel from the car. Fix the roof panel on the place intended for it on a door of a luggage compartment. For this purpose unscrew fixing paw on a door of a luggage compartment, establish the roof panel on support and attach a paw to panel handles
. The forward part of a support is intended for installation of the big (forward) panel of a roof, and a back part — for the small (back) panel.
Fig. 1.21. Installation of the demountable panel of a roof on support of a door of a luggage compartment
For installation to the place of the demountable panel of a roof, insert panel hinges into the grooves intended for them, then reject the panel down, at the same time holding with her hand, and insert spring levers into nests. Press the handle of the panel of a roof and close it.