Fig. 1.12. Button of inclusion of heating of back glass: 1–button

To remove a zapotevaniye or an icing of back glass, press the switch (fig. 1.12) .

The ignition key should be in the situation "ON".

The strip heating element on an internal surface of back glass will quickly clear a surface. At inclusion of a heater the corresponding signaling device lights up. To switch off a heater press the switch once again. After glass will be cleared, do not forget to switch off heating. Long inclusion of heating can lead to the category of the storage battery. Heating is not intended for drying of rain water or snow thawing.

PREVENTION In order to avoid the category of the storage battery include heating only at the working engine. Clearing an internal surface of back glass, be careful, do not scratch a strip of a heating element.