Operations on replacement of bolts of fastening of a forward and back wheel are carried out equally.

At replacement of bolts of fastening of a wheel act as follows:

Weaken nuts of fastening of a wheel.

Lift the car and establish on support. Remove a wheel.

Remove a brake disk or a brake drum.

Fig. 13.21. Stripper use for expression of a bolt of fastening of a wheel from a nave of a forward wheel: 1–nave flange; 2–a nut, partially navernuty on a bolt; 3–stripper

Partially screw a nut on a bolt of fastening of a wheel which it is necessary to replace (fig. 13.21) . A stripper squeeze out a bolt from a nave, turn out a nut and remove a bolt.

Insert a new bolt from a reverse side into a nave opening, establish on a bolt some thick washers and, screwing on it a nut, press it in a nave.

Establish a brake disk or a brake drum.

Establish a wheel, screw nuts, lower the car and tighten nuts of fastening of a wheel