Removal of a regulator of pressure of fuel make as follows.

Dump pressure in fuel system.

Switch off ignition and disconnect a "weight" wire from the storage battery.

Remove the block of the fuel pump / fuel level sensor from a fuel tank.

For models of cars till 2001 further removal of a regulator make in the following order:

– remove a clip, a fixing regulator of pressure to the fuel filter, then weaken a collar and remove a hose from a pressure regulator;

Fig. 5.13. An arrangement of bolts of fastening of a regulator of pressure of fuel to the block of the fuel pump/fuel level sensor on models till 2001

– turn out screws and remove a regulator pressure from the block of the fuel pump/fuel level sensor (fig. 5.13) ;

For models of cars since 2001 further removal of a regulator make in the following order:

– remove an absorption plate from the block of the fuel pump/fuel level sensor.

– release from clamps and remove a fuel tube from a regulator of pressure of fuel.

Fig. 5.14. An arrangement of a regulator of pressure of fuel in the block of the fuel pump/fuel level sensor on models since 2001

– take a regulator of pressure of fuel from the block of the fuel pump/fuel level sensor (fig. 5.14) .

Installation of a regulator of pressure of fuel carry out to sequences, return to removal, taking into account the following: before installation of a regulator of pressure of fuel surely establish on it a new sealing ring.