RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
12. Suspension bracket
   General information
   Specifications
   Rack of a forward suspension bracket
      Removal
      Check
      Installation
   Dismantling and assembly of an amortization rack
   Forward stabilizer of cross-section stability
   Bottom lever of a forward suspension bracket
   Rotary fist and nave of a forward wheel
   Back stabilizer of cross-section stability
   Shock-absorber of a back suspension bracket
   Levers of a back suspension bracket
   Spring of a back suspension bracket
   Nave and bearing of a back wheel
13. Steering and running gear
14. Body
15. Electric equipment
Electric equipment schemes




Toyota RAV4>> Suspension bracket>> Rack of a forward suspension bracket>> Installation
From under a wing establish a rack on a place and insert hairpins of the top fastening of a rack into openings in a body. By hand screw nuts of the top fastening of a rack. Installation of a rack of a forward suspension bracket make with the assistant, as it rather heavy and bulky.
Connect the lower part of a rack to a rotary fist and insert two bolts. Screw nuts, combine earlier put labels and tighten nuts.
Fix on a rack an arm with a brake hose. In the presence of ABS establish an arm of a plait of wires of the sensor of speed of rotation of a wheel.
On models since 2001 connect draft of the stabilizer of cross-section stability to an arm on a rack and fix it a nut.
Establish a wheel, screw nuts, lower the car and tighten nuts of fastening of a wheel.
Tighten three nuts of the top fastening of a rack of a forward suspension bracket.
Check and if necessary adjust corners of installation of forward wheels.