RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
12. Suspension bracket
   General information
   Specifications
   Rack of a forward suspension bracket
   Dismantling and assembly of an amortization rack
   Forward stabilizer of cross-section stability
   Bottom lever of a forward suspension bracket
   Rotary fist and nave of a forward wheel
   Back stabilizer of cross-section stability
   Shock-absorber of a back suspension bracket
   Levers of a back suspension bracket
   Spring of a back suspension bracket
   Nave and bearing of a back wheel
13. Steering and running gear
14. Body
15. Electric equipment
Electric equipment schemes




Toyota RAV4>> Suspension bracket>> Spring of a back suspension bracket
       PREVENTION
Surely replace both springs with car axes even if only one spring is damaged.
At installation use on one axis of the car of a spring with identical technical characteristics (with identical color marking).

Block forward wheels an emphasis. Lift a back part of the car and establish it on support. Remove a wheel.
On models since 2001 disconnect draft of the stabilizer of cross-section stability from the bottom cross-section lever.
Jack raise the longitudinal lever of a back suspension bracket to compress a spring and to unload the shock-absorber.

Fig. 12.20. Arrangement of a bolt of the bottom fastening of the back shock-absorber


Turn out a bolt of the bottom fastening of the shock-absorber (see fig. 12.20 ).
Slowly lower a jack together with the longitudinal lever of a back suspension bracket and remove a spring.
Examine a spring on lack of vykroshivaniye of metal or cracks in a spring covering in the presence of which the spring will fail as a result of local corrosion. Also check a condition of the top support of a spring on absence of damages and if necessary replace it.
Installation make in sequence, return to removal.