RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
   General information
   Specifications
   Anti-blocking system of brakes (ABS)
   Replacement of forward brake shoes
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement of back brake shoes
   Replacement of the working brake cylinder
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of brake system
   Replacement of brake tubes and hoses
   Pumping of a hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Replacement of cables of the parking brake
   Adjustment of provision of a pedal of a brake
   Check and replacement of the switch of a stoplight
      Check
      Replacement
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Electric equipment schemes


Toyota RAV4>> Brake system>> Check and replacement of the switch of a stoplight>> Replacement
Disconnect the electric socket from the stoplight switch.
Fig. 11.45. Gap measurement between a carving part of the case of the switch and the limiter of a course of a pedal of a brake: And = 0,5–2,4 mm


Weaken a lock-nut of the switch of a stoplight and turn out it from an arm of a pedal of a brake (see fig. 11.45 ).
Installation make in sequence, return to removal.
After installation adjust height of installation of a pedal of a brake and position of the switch of a stoplight.