RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
   General information
   Specifications
   Anti-blocking system of brakes (ABS)
   Replacement of forward brake shoes
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement of back brake shoes
   Replacement of the working brake cylinder
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of brake system
   Replacement of brake tubes and hoses
   Pumping of a hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Replacement of cables of the parking brake
   Adjustment of provision of a pedal of a brake
      Height of installation of a pedal
      Free wheeling of a pedal of a brake
      Stock of a course of a pedal of a brake
   Check and replacement of the switch of a stoplight
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Electric equipment schemes




Toyota RAV4>> Brake system>> Adjustment of provision of a pedal of a brake>> Free wheeling of a pedal of a brake
Press a brake pedal several times at the idle engine to create in cavities of the vacuum amplifier the identical pressure close to atmospheric pressure.

Fig. 11.46. Change of a free wheeling of a pedal of a brake: X = 1–6 mm


Press a brake pedal prior to the beginning of notable resistance and measure distance which there passed a brake pedal (fig. 11.46) . The free wheeling of a pedal of a brake should be in limits of 1-6 mm.

Fig. 11.45. Gap measurement between a carving part of the case of the switch and the limiter of a course of a pedal of a brake: And = 0,5–2,4 mm


If the free wheeling of a pedal of a brake differs from demanded value, check distance And (see fig. 11.45 ) between a carving part of the case of the switch and the limiter of a course of a pedal of a brake.