RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
   General information
   Specifications
   Anti-blocking system of brakes (ABS)
   Replacement of forward brake shoes
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement of back brake shoes
   Replacement of the working brake cylinder
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of brake system
   Replacement of brake tubes and hoses
   Pumping of a hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
      Check
      Removal
      Installation
   Adjustment of the parking brake
   Replacement of cables of the parking brake
   Adjustment of provision of a pedal of a brake
   Check and replacement of the switch of a stoplight
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Electric equipment schemes




Toyota RAV4>> Brake system>> Check and replacement of the vacuum amplifier of brakes>> Removal
Disconnect the vacuum hose connecting the inlet pipeline and the vacuum amplifier of brakes. Be careful not to damage a vacuum hose at removal from the union of the valve of the vacuum amplifier.
Remove the main brake cylinder. On models till 2001 remove a branch pipe of an air inlet and the block of safety locks and the relay.
Remove the bottom decorative panel on the left side of the dashboard.
Remove a returnable spring of a pedal of a brake.

Fig. 11.39. Fastening of the vacuum amplifier of brakes: And – a pin; In – nuts


Disconnect a pusher of the vacuum amplifier of brakes from the top part of a pedal of a brake for what take шплинт and take out a pin (fig. 11.39) .
From salon of the car unscrew four nuts of fastening of the vacuum amplifier of brakes to a partition of a motor compartment and take the vacuum amplifier of brakes from a motor compartment.