RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
   General information
   Specifications
   Anti-blocking system of brakes (ABS)
   Replacement of forward brake shoes
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement of back brake shoes
   Replacement of the working brake cylinder
      Removal
      Installation
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of brake system
   Replacement of brake tubes and hoses
   Pumping of a hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Replacement of cables of the parking brake
   Adjustment of provision of a pedal of a brake
   Check and replacement of the switch of a stoplight
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Electric equipment schemes


Toyota RAV4>> Brake system>> Replacement of the working brake cylinder>> Removal
Block forward wheels an emphasis.
Weaken nuts of fastening of a back wheel. Lift a back part of the car and establish it on support.
Remove back brake shoes.
Remove dirt round a junction of a brake tube and a back part of the working brake cylinder.
Fig. 11.34. Arrangement of a connecting nut (1) fastening of a brake tube and bolts (2) fastenings of the working brake cylinder


Unscrew a connecting nut 1 (fig. 11.34) . Being careful, take a brake tube from the working brake cylinder and close it a stopper.
Turn out two bolts of 2 fastenings of the working brake cylinder to a protective casing of a back brake. Being careful, remove the working brake cylinder.