RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
   General information
   Specifications
   Shaft of a drive of forward wheels
   Shaft of a drive of back wheels on all-wheel drive cars
      Removal
      Installation
   Replacement of protective covers of hinges of a shaft of a drive of a wheel
   Driveshaft
   Basic bearing of the driveshaft
   Sealing cuffs of reverse main gear
   Differential on all-wheel drive cars
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Electric equipment schemes






Toyota RAV4>> Driveshaft and shaft of a drive of driving wheels>> Shaft of a drive of back wheels on all-wheel drive cars>> Removal
Remove a cap from a nave or a decorative cap of a wheel. On release models till 2001 take шплинт and turn out a lock-nut of fastening of a shaft of a drive to a nave of a back wheel. On models since 2001 unbend the fillet of a nut bent in a groove of a shaft of a drive.
Face natural a big shoulder (with the extension piece) weaken a nut of fastening of a shaft of a drive to a nave of a back wheel.
Emphasis block forward wheels to interfere with car moving. Weaken nuts of fastening of a back wheel, then lift a back part of the car and establish it on support. Remove a wheel.
On cars from ABS remove the sensor of speed of rotation of a wheel.
Unscrew a nut of fastening of a shaft of a drive to a nave of a back wheel.
With paint or marker put combination labels on a flange of differential and a flange of the internal CV JOINT of a shaft of a drive.

Fig. 10.4. An arrangement of nuts of fastening of the internal CV JOINT of a back shaft of a drive to a differential flange


Unscrew 4 nuts and separate the internal CV JOINT of a shaft of a drive from a differential flange (fig. 10.4) .