Pump out a coolant from central air at service station.

Switch off ignition and disconnect a "weight" wire from the storage battery.

Lift a forward part of the car and establish on support. Remove the right antisplash guard of a motor compartment.

Remove a belt of a drive of the compressor of the conditioner.

Fig. 4.33. Conditioner compressor: 1–electric sockets and wires; 2–top bolts of fastening of the compressor of the conditioner; 3–pipelines

Disconnect from the conditioner compressor the electric socket and pipelines (fig. 4.33) .

Turn out the top and bottom bolts of fastening of the compressor of the conditioner and remove it from the car.

If the new compressor is established, fill in in it necessary amount of oil of demanded brand according to compressor data.

Installation of the compressor make in sequence, return to removal, taking into account the following.

Replace all sealing rings.

Fill central air at service station.