RAV4 PAB4-Toyota Toyota
1. Car operation
2. Maintenance
3. Engines
4. Cooling and conditioning systems
5. Fuel system and system of production of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of a drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windscreen and motionless glasses
   Removal and cowl installation
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating lattice
   Removal and installation of an upholstery of doors
   Doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of a luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of furnish of the dashboard
   Removal and installation of casings of a steering column
   Removal and dashboard installation
   Removal and installation of seats
   Adjustment of the elevating and movable panel of a roof
15. Electric equipment
Electric equipment schemes






Toyota RAV4>> Body>> Removal and installation of casings of a steering column
       PREVENTION
Cars are equipped with the systems of safety (SRS) including safety cushions and natyazhitel of seat belts. Before work about sensors of blow, the dashboard and a steering column disconnect at first negative, and then positive the plug from the storage battery and wait for 2 minutes. It will exclude unauthorized disclosure of safety cushions and operation of natyazhitel of seat belts which can put injuries.

Removal of casings of a steering column make as follows:
Reject a steering column down to an emphasis and remove a steering wheel.
From below turn out screws.

Fig. 14.55. An arrangement of screws of fastening of casings of a steering column on models since 2001


Remove the top and bottom casings of a steering column (fig. 14.55) .
On models till 2001 after removal of the bottom casing, turn out one more screw of fastening of the top casing.
Installation of casings of a steering column make in sequence, return to removal.